Buck 110 vs Buck 112 – Buck Knife Comparison

Buck 110 and buck 112 are among of the most copied knives in the world. Both of them are one of the best-selling knives in the world. By today, 15 million of them have been sold. Buck knives are the most popular American knife business. 

They began on a very modest scale with Hoyte Buck who was a blacksmith earlier in his life and later in his life he started making knives and gaining a reputation because they retained an edge. 

At first, it was more of a bespoke knife store until they began mass production in 1902 when his son Al Buck took over the firm. In 1964 they launched the famed buck 110 which became the best seller of Buck Knife until this day. Later they made a few big adjustments and produced Buck 112.

Now, these two knives have been the most popular knife in the pocket knife world. With time they have experienced a lot of alterations from their earlier iteration. If you are wondering about whether one of these buck slim EDC models suits you better, you are in the correct spot.

Here I will show you the significant similarities and differences of both the knives and a full evaluation of them too. So let’s plunge in.

What is the main difference between Buck 110 and Buck 112?

The hand-to-hand comparison boils down to the fundamentals: the Buck 110 has an overall length of 7.85 inches and weighs 5.09 ounces; the blade has a length of 3-3/4 inches, is composed of 420HC steel, and has a clip point type; and the blade style is tanto. 

Additionally, the Buck 112 has an overall length of 8.96 inches, a weight of 7.2 ounces, a blade length of 3 inches manufactured of 420 HC blade steel, and a clip point type blade. Additionally, the blade style is drop point.

Key Differences Between the Buck Knives 112 and 110

It has been previously remarked how iconic each of these knives are, and there has been a lot of anticipation around the comparison between the two. On the other hand, there isn’t much that sets these knives from from one another.

Back in the day, the Buck 110 Hunter was the knife that everyone wanted to have. To put it simply, it was “the knife.” It’s the knife that’s been shown in a number of different survival films and television shows, and it’s been widely regarded as the best survival pocket knife for decades. 

Because it weighs 7 ounces, this knife is not very portable because it is somewhat heavy. A leather sheath that may be worn on the hip is included with the item.

The 110 and the 112 are quite similar to one another. Just a little larger. So here’s the backstory: allegedly, the troops at the Navy used to have this buck 110, and someone used someone else’s buck 110 during the combat. 

This is when the knife business decided to set a restriction on the length of the blade, deciding that it could only be 3 inches long. The result of this decision is the Buck 112 Ranger.

Both feature a clip-point blade type, are constructed of 420 HC steel, and have received Paul Boss heat treatment, which is a well-known heat treatment procedure. The 112 has the same iconic design as the original one, but it is a lot lighter and thinner. Because of this, they both have a sliver of an advantage.

When it comes to the pricing, the only variation you will find at Buck’s in their seasonal sales and clearance offerings on their website is between 10 and 12 US Dollars. When deciding between these knives, pricing is not the most important consideration.

 In all candour, the answer is going to rely on your personal preferences, the tasks you want to use the knife for, and how you want the handle to feel in your hand.

If you are someone who, like me, wants to carry a large and hefty knife even for daily usage, then the 110 is the ideal option for you to go with. But you should go with the 112 if you want an effective knife that is lighter and has a thinner profile and that feels extremely comfortable in your hands. This is the model you should choose.

Comparative Analysis of the Buck 110 and the Buck 112

SPECSBUCK 110BUCK 112
Overall Length7.25’’ 8-9/16”
Blade Length3” 3-3/4”
Blade Steel420HC420HC
Knife Weight5.9 oz7.2 oz
Blade StyleClip PointClip Point 

Some Important Parallels Between the Buck 112 and the Buck 110

  1. Steel: 420HC steel with a Paul boss heat treatment; this steel has excellent edge retention as well as resistance to wear and corrosion. Increased longevity and high toughness, while maintaining an ease of sharpening.
  2. Both are equipped with a sheath made of high-quality black leather with a belt loop so that it may be worn on the hip.
  3. Handle: Both the kitchen knife and the chef’s knife have an ebony wood handle with finger grooves.
  4. Design of the Blade: Both feature a hollow grind and a clip-point style for their blades.
  5. Price: Both options have the same price, with a maximum variation of five to ten dollars depending on whether or not Bucks is having a clearance sale or another kind of discount.

Some Important Distinctions Between the Buck 112 and the Buck 110

  1. Blade Lenght: The blade on the BUCK 110 measures 3-3/4 inches, whereas the blade on the BUCK 112 measures 3 inches but has a more refined clip point.
  2. Weight: The BUCK 112 has a weight of 5.9 Oz, making it a rather lightweight and thin product. The weight of Buck 119, on the other hand, is 7.2 ounces, which is very much on the heavier side of things.

A Comprehensive Analysis of the Buck 110 Knife

The traditional appearance of the Buck 110 Hunter Pro knife was the very first thing that piqued my interest in purchasing one. These days, in this age of tactical knives, the brass bolster and the wood handle give the knife such an elegant and high-class appearance.

The blade of the Buck 110 folding hunting knife is designed with a clip point and hollow grind. The total length of the blade is 3 and 34 inches. This item is constructed out of 420 high carbon steel that has been given the paul boss heat treatment. 

Because of this, while it will have the same level of toughness as carbon steel, it will be much simpler to sharpen. It provides excellent edge retention as well as resistance to corrosion. 

The thickness of this blade’s spine is 0.12 inches, which is approximately an eighth of an inch and converts to just a hair over than three millimeters. This measures a total length of 4 7/8 inches when it is closed.

This particular knife has a lock-back mechanism. It features a brass bolster on the side and a brass liner that is one piece with the bolsters. Both of them are made of brass. In addition to that, it has a deep carry pocket clip, which prevents the Buck 110 from slipping out of pocket space.

The knife weighs 7.7 ounces, which makes it rather substantial. The construction of the first iteration of the Buck 110 knife is an example of traditional elegance. Finger grooves are carved into the ebony wood that makes up the grip of the knife.

 On the other hand, the hunter pro, which is an improved version of the buck 110, is constructed out of S30V steel and G10 handle resin. Because of the G-10 resin, this version is far more robust than previous iterations.

 This tough material cannot be broken, regardless of how roughly you use the knife. It is ideal for an exciting journey into the unknown wilderness.

Buck 112 – Detailed Review

The Buck 112 is quite similar to the Buck 110, with just a few key distinctions between the two.

The 112 is equipped with a clip point blade that is 3 inches long. Because the short clip point has a blade that is more resistant to wear and tear, it is preferred by certain individuals. 

When it is closed, it measures 4.25 inches in length, but when it is open, it is 7.25 inches in length. 5.9 ounces is a weight that is considered to be rather light for the knife. In addition, the paul boss heat treatment is applied to the 420HC steel that is used in the blade’s construction. 

It has excellent edge retention in addition to being resistant to corrosion. The bolster on the side of the knife handle is made of brass, while the handle itself is constructed of ebony wood. However, in contrast to the Buck 110, this bolster has a little lip on it, which means that it may act as a finger guard to some extent. 

It provides the hand with a greater sense of solidity. A locking mechanism may be found at the rear of the knife. It is packaged in a high-quality black leather sheath that has a loop for attaching to a belt.

The new and upgraded buck ranger pro is made of S30V steel and G-10 resin steel, both of which contribute to the increased longevity of the tool. For general day-to-day usage, the lock back mechanism of the Buck Ranger Pro is included.

The quality of the 112 knife is comparable to that of the 110 knife. They are identical in terms of the capacity to retain a cutting edge, and both perform very well in damp environments.

If you want a knife that is more manageable, lighter, and more compact, this is the finest option for your hunting, camping, and other outdoor excursions.

Still Unable to Make a Choice? An alternate solution is as follows: The Buck Knives 55 Folding Pocket Knife is available at Buck Knives.

Although the Buck 112 is a buck slim knife, both the 110 and 112 are on the large end of the knife size spectrum. This means that they are both very large for pocket knives. If you want something more compact, your best bet is the Buck 55 folding pocket knife. It comes in a variety of colours.

This is an excellent choice for a pocket knife in every respect. Someone who uses a knife for carving or camping would benefit greatly from owning this item. It has the same design as the buck 110, but the package is much more compact and lighter.

 It is a scale that is one half that of the buck 110. Because it is so lovely and compact, it doesn’t take up much room in your pocket. The total length of the knife is 5.75 inches, and the length of the blade is 2.65 inches.

The handle is made of the same wood as the blade, however the wood has a somewhat different appearance than American walnut wood. The blade is made of 420 high-carbon steel. Additionally, it has a pocket clip and a rear lock. However, a sheath is not included in the package.

The Buck 55 is the knife for you if you’re looking for something that’s both traditional and relatively tiny.

Buck 110 and Buck 112 Face Off in Conclusion

Both the Buck 110 and the Buck 112 pro knives have a timeless appearance, are made to a high standard in the United States, and have recognisable and versatile designs. You may feel comfortable going with any one of these options. 

The sensations you get when you hold any one of them are much more essential. Both of these knives are just as excellent as one another in terms of their uses, resilience to wear and corrosion, and ability to hold an edge.

 Therefore, the answer is in the kind of knife that best suits your needs. Buck 112 is an excellent choice for you if you like lightweight and compact blades, since it has all of these features. Buck 110 is a good choice for you if you want to chop with a knife that requires more muscle to handle.

FAQ

What are some of the commonalities shared by the Buck 112 and the Buck 110 models?

Both the Buck 112 and the Buck 110 feature blades made of 420HC steel that have been heat treated by Paul Boss, which allows for good edge retention. This is one of the most important commonalities between the two models.

 Both come with a strong, beautiful sheath made of black leather that may be worn on the hip and has a belt loop for attachment. Both the fork and spoon handle are crafted from ebony wood with finger grooves. Both of these knives feature a hollow grind and a clip-point type blade. And the cost is the same for each of them.

Is It Really Worth The Buck 110?

Buck 110 is an excellent choice for outdoor activities such as camping, hunting, or any other kind of wild adventure. Due to the blade’s excellent resistance to corrosion, it is an excellent choice for use in any damp environment.

If you are a hunter, you probably already have this or have at least heard of it. This timeless piece of beauty is an absolute need. It is essential that every knife aficionado have one in their collection.

When was Buck 112 first made available?

The Buck 112 was first released in the 1960s as a more compact alternative to its predecessor, the Buck 110.

Is the Buck 110 produced in the United States?

Yes, the vast majority of Buck knives are produced in the United States. Post Falls, Idaho is home to Buck’s primary manufacturing facility, which is staffed by more than 300 people.

Leave a Comment